smm google 5 star header 2
Over 80 • 5-Star Reviews!

Custom Metal Signs: MN Company |
info@SirMetalman.com | 651-808-8603

Search

Metal Sign FAQs:
Your Ultimate Guide to Frequently Asked Questions

Thinking about a custom metal sign and not sure how any of it works? This is our plain-language guide to the questions we hear most: what metal signs are made of, how gauge and weight work, what “bridging” means, how a design gets cut from metal, and how it all comes together. Read it top to bottom, or jump to the question you need.

Most of our work is business signage for Twin Cities companies, from storefronts to lobby signs, and we also build personal pieces for homes and cabins. Either way the fabrication is the same, and so are the questions.

Sir Metalman designs, fabricates, powder coats, and installs every sign in-house in Lake Elmo, Minnesota. So the answers here come from the people actually cutting and building the metal, not a reseller. Have a question we haven’t covered? Contact us and we’ll answer it and add it to this page.

Table of Contents

What types of metal are used in metal signs?

Signs are usually made from steel, aluminum, or weathering steel (Corten), and the right one depends on your sign’s size, location, and budget.

See our full guide to sign metals

What is powder coating, and why do you use it?

Every sign we build gets powder coated, and it’s not spray paint. The color goes on as a dry powder, bonds to the metal with an electric charge, then cures in an oven into a hard, even layer that seals out weather, rust, and UV fading.

This lets a metal sign hold its color and finish outdoors for years, through Minnesota winters and summer sun. You choose your color from a wide range of finishes, from glossy to matte to textured. See the full guide to powder coating, durability, and color

What's a good size for a custom metal signs?

The great thing about a custom sign is that it can be almost any size. That said, we can give you some guidance.

If the sign is going indoors, think about where it will hang before you finalize the design. Will it be the focal point of the wall or room? If so, go big enough to make a statement. For a lobby sign, 2 to 4 feet is a good range, big enough for strong brand visibility without overpowering the space.

A simple trick: put blue painter’s tape on the wall to outline a few different sizes, then step back and see which proportion looks right.

For an outdoor sign, or any sign meant to be read from a distance, make sure the text is big enough (see the table). If you want drivers to be able to read it, aim for at least 60% open space to 40% text, since crowded signs are hard to read at speed. It’s worth planning for how fast people are moving and how far away they’ll be.

Data from United States Sign Council Foundation

sign letter visibility per distance chart chart

What metal gets cut out and what stays?

Metal cut signs give you so much design flexibility.

It helps if we’re speaking the same language, though.

Here’s the key idea: the metal can either BE the shape you want (that’s called positive space), or the shape can be the opening left behind when metal is cut away (that’s negative space). You get to decide which look you’re after.

  • See the image of a mountain shape cut from metal. Right next to it, see the negative space the cut leaves behind, which also forms a mountain shape.
  • You can see “design made from metal” versus “design cut from metal” on two real signs. On the TRUEN GROUP sign, the logo symbol and text are the actual metal, mounted on standoffs off the entrance wall for a modern, earthy, welcoming feel. The “MAN CAVE” sign is the opposite: the letters are cut out of the metal, leaving their shape as readable negative space.

 

It takes experienced designers to lay a sign out so it’s both easy to read and visually creative, and luckily, that’s exactly what we’ve got at Sir Metalman!

Flat Metal Mountain Visual showing the metal can either BE the shape you want (that's called positive space), or the shape can be the opening left behind when metal is cut away (that's negative space)
Brand Metal sign showing cut metal pieces showing the brand
The white metal pieces are the object of the sign
letters cut out of metal for metal sign
The letters have been cut away

Versatility of metal cutting design

The letters “TRAIL” have been cut. Image shows the remaining steel negative space in the shape of letters and the steel cut letters below.

In signs, depending on the look you want, either can be utilized.

The brain is amazing, your brain will fill in empty spaces with recognizable shapes from your learned memory so you can identify what is being shown – even with some data missing.

Visual showing metal letters cut out to be mounted on a structure or letters that are cut out and the negative space is the design: metal sign faqs by sir metalman of lake elmo mn

Letters cut out of metal panel

This sign for St Croix Trailblazers, an amazing non-profit horse therapy organization in Stillwater, MN uses cut-out letters and shapes as the design. The letters are cut right through their large barn sign, and the horse shape is cut in too (with lines that give the impression of a horse). The piece was then sanded smooth and powder coated black for a beautiful, long-lasting metal sign.

See more examples of single panel cut through design

See more examples of double panel cut through design

visual showing metal sign design of cut out letters from stillwater mn- St Croix Trailblazers barn sign Stillwater MN
St Croix Trailblazers barn sign Stillwater, MN. Shows cut out letters

Letters cut separate and attached to a panel 

This sign for Sweets by Brickhouse, a wonderful ice cream shop in White Bear Lake, MN, works the other way. Here the letters are cut out individually and then attached to a metal panel, so they sit on top of the background instead of being cut through it.

The big difference between these two methods: when a design is cut out of a single panel, we build in “bridging” so the pieces don’t fall through during the cut. See section on Bridging

See more examples of cut letters attached to the panel 

visual showing raised letters cut out and attached design style of metal sign Sweets by Brickhouse ice cream shop sign in White bear Lake MN
Letters cut separate and attached to a panel 

What does bridging mean in metal design?

Cutting a design out of metal takes some clever thinking, and that’s where “bridging” comes in. Bridging means leaving small connectors of metal that hold the loose parts of a design in place, so pieces of a letter or shape don’t fall out when they’re cut free.

Printed letters are not the same as Cut letters

We tend to picture printing when we think about making letters and shapes. But screen printing on a T-shirt is a whole different animal than cutting a shape out of metal! Take our example T-shirt with the letter “A” printed in blue. When you print, the design just lays on top, so nothing has to change. The middle triangle of the “A” stays put because the ink holds it there.

See the 2 “A” printed T-shirts. 

  • The blue “A” with red, cut-line border and the red “A”
  • The red “A” shows what actually gets cut out. The whole outside plus inside design are eliminated, leaving a design that does not make sense.
letter on a tshirt
Letter printed on a T-shirt
letter A with cut line around
The red lines outlines the cut line around the letter "A"
metal letter bridging tshirt cut fall out
The red area shows the section that would fall out after the cut

Why bridging is necessary when cutting metal

When printing on something, the design is just transferred. No alteration is necessary.  Creating metal signs, requires metal cutting and metal design.

The image 1st column on the image shows cutting from metal if we DO NOT BRIDGE. The shape or letter will simply fall out along the outer edge, it does not keep the original design intent and it’s hard to read.

The 2nd column on the image shows our design magic. By adding purposeful designed metal bridging, we create bridges between the shapes that get cut.  The brain fills in the gaps, and often, you may not even notice the bridging. The metal shape stays and is legible.

Visual image showing metal letters without bridging and with designed bridging to create a legible metal cut sign. metal sign faqs by sir metalman
Visual image showing metal letters without bridging and with designed bridging to create a legible metal cut sign.

What does metal gauge or gage mean?

Gauge or gage can be a confusing term as dealing with metal sheets.

Gauge in metal sign build refers to the thickness of the sheet metal.

We often think of measurements like length- the bigger the number, the longer the distance.  But this is opposite with gauge.

The smaller gauge number of 8 (which is .16″ thick) is thicker than the gauge of 20 (.036″) thick.

Most Common metal sheet Gauges used for signs.

Most common sized signs, use a metal sheet gauge of 12, 14, or 16.

What gauge used depends on possible design factors:

  • Sign design
  • Placement of sign
  • Total Size of sign
  • Number of panels used 
  • Installation area

Sir Metalman is an expert in custom metal signs and will use the best gauge for your custom made sign.

Sheet steel conversion chart-Most Common sizes for metal signs showing common gauges and conversion conversion chart metal sign faqs by sirmetalman showing
Metal sign gauge conversion chart

How much do metal signs weigh?

The weight of a metal sign depends on various factors, including its number of metal panels used, physical dimensions, thickness (gauge), and the type of metal used.

To see the impact of type of metal and thickness of metal used, see the chart.

Metal Weight Chart shows

  • 3 common sign physical sizes (1’x1′), (2’x3′) and (4’x5′) 
  • 2 different thicknesses (.06″ thick) (.13″thick)
  • contrasting steel and aluminum weights for each.

You can use this chart for sign weight as an approximation.  A sign most likely will have some sections cut out which would decrease the weight.  The sign may also use multiple metal panels which also need to be taken into account for sign weight.

As sign designers, Sir Metalman can advise on a material usage depending on your sign environment and area size and desired thickness all for visual appeal and manufacturability of the sign.  Material and sign size also effect sign price as aluminum costs more than steel and the thicker the piece the more expensive.

Common Metal Sign Weights by size

Chart showing metal sign weight
Comparing steel and aluminum
Contrasting different thickness and area

Metal Weight Chart shows 3 common sign physical sizes (1'x1'), (2'x3') and (4'x5')  2 different thicknesses (.06" thick) (.13"thick) contrasting steel and aluminum weights for each.
Metal sign gauge conversion chart

How do you design a custom metal sign?

We’ve covered metal sign FAQs but what about the other work done to create the actual sign,  the design.

Whether you want a custom sign to showcase your business brand or a forever sign for home, a custom metal sign can be made just for you!

To start, we need to know your idea, and we translate that into metal. 

  • To help you understand the potential and the limitations of metal design, you can review the types of signs
  • If you have a specific brand image, logo and font, you can send us the files.
  • We’ve had people send us a photo of their idea as a drawing.
  • Now, with technology, many people send an AI generated image.  That’s helpful in that it lets us share a starting point of what you like in a sign.  Please keep in mind, AI generated sign ideas often cannot actually be fabricated.  Sometimes AI incorporates floating features and design elements that are impossible to build.

 

Metal sign design incorporates special features: size, spacing, colors, standoffs, lighting… that’s right, many variables so you get a truly custom piece.

metal sign design things to consider size, spacing, colors, standoffs, lighting

What is Corten Steel

Corten steel, also called weathering steel, is designed to develop a natural rust-like surface over time. Unlike ordinary steel, that outer layer of oxidation forms a protective patina that helps slow further corrosion.  This is different than rust that is created in steel, steel rust is a destructive rust which overtime destroys the metal.

Corten Steel is popular for outdoor signs because it creates a warm, rustic, architectural look without needing paint or powder coating. The color can range from orange-brown to deep reddish brown as it weathers.

Note: during the early weathering process, Corten can release rust-colored runoff that may stain concrete, stone, or other nearby surfaces.  We usually pretreat our Corten Steel signs so when you get it, it already has started the rust like process and has the starting patina.

Note: If you like the “look” of rust but do not want the “rust dust”, we have a powder coat color that mimics a patina look but because it’s a powder coat, there is no dust from the sign which can be undesirable for indoor signs.

See below for our Corten Steel Patina Accelerator Recipe.

Corten Steel Patina Recipe

corten steel example sign